Fujitsu M2617T/M2618T:Switch Setting


PCA layout    All configurations marked "*" are default settings

Switch Settings(S/N:00001 to 30000)

Key SW1 Alternation of IRQ 14/reserved Key 1 Key 4 Key 5 OFF(*) ON OFF Pin 29=IRQ 14, Pin 31=Reserved OFF(*) OFF(*) ON(*) Pin 29=Reserved, Pin 31=IRQ 14 Slave present(SLV)/active mode(ACT) Key 2 Key 3 OFF ON Slave present mode ON(*) OFF(*) Active mode Key SW2 Master drive/Slave drive Key 1 ON Slave drive OFF(*) Master drive

Switch settings(S/N:30001 or larger)

Key SW1 Alternation of IRQ 14/reserved Key 1 Key 2 Key 5 OFF ON OFF Pin 29=IRQ 14, Pin 31=Reserved ON(*) OFF(*) OFF(*) Pin 29=Reserved, Pin 31=IRQ 14

Slave present(SLV)/active mode(ACT) Key 3 Key 4 ON OFF Slave present mode OFF(*) ON Active mode

Key SW2 Master drive/Slave drive Key 1 ON Slave drive OFF(*) Master drive

Daisy chain connection

To a drive which does not meet ATA standard proposal, the M2617/8T can be connected as the master, the slave drive works under the following conditions:

Master: M2617T/M2618T Slave: M2611/2/3/4/6 or M2622/3/4
Master drive
Slave driveM2617T/18T
M2611/2/3/4/6Slave present mode
M2622/3/4Active mode


to the table of contents!!