CP3364
Customer Options

C/D
The C/D jumper is used to determine whether the drive is master (drive C) or slave (drive D). The drive is configured as a master (drive C) when jumped and as a slave (drive D) when not jumpered.
DSP & SS This pair of jumpers determines the signals on pin 39 of the interface connector.

Jumper
DSP SS
Action
X-spindle synchronizaation signal disabled on pin 39
-activity LED signal available on pin 39
-Must be in place for CAM/ATA drives.
X-spindle synchronization signal enabled on pin 39
-activity LED signal disabled from pin 39
-pin 39 floating
Jumper
E1 Disable Spin Up until command received
E2 Not used
E3 Not used

CMOS Drive Parameters
Cylinders702
Heads16
Precomp0
Landing Zone702
Mounting Holes
Side: 6-32 UNC-2B .12 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion